Unistrip
PRODUCT DESCRIPTION
FLOOR POLISH STRIPPER
Uni-Strip has been formulated specially as a ‘stripping’ agent for floors treated with emulsion polishes and seals.
Uni-Strip is a liquid blend of non-caustic alkalis, solvents and detergents to provide rapid penetration and removal of floor polishes including tough metallised finishes and old, tenacious deposits.
Uni-Strip is ‘ammonia free’ and it’s high detergency powers enable floors to be quickly rinsed prior to re-coating.
DIRECTIONS FOR USE
Dilute Uni-Strip with 10 parts warm or cold water.
More concentrated solutions may be required for tenacious old deposits.
Apply to floor and allow solution to remain until the polish has been penetrated.
Test small area using soft cloth or abrasive pad to ensure complete penetration before attempting full removal of polish.
The use of floor scrubbing machine with the use of black or green pads will speed up the operation especially on large areas.
Ensure thorough rinsing of floors with clean warm water to remove all residues of polish and stripper to enable perfect adhesion of new polish.
The use of a ‘wet pick up’ vacuum machine will speed up the removal of rinse waters.
FOR HEALTH & SAFETY INFORMATION REFER TO DATA SHEET.